|
|
|
£789.95
http://www.kam.co.uk
|
KAM POWERED MIXER KDM 10 (750W) WITH 2 X KAM EXTREME 115 SPEAKERS (PA1) Professional 750W powered mixing console with advanced mixing facilities and built in 24BIT DSP Effects. Powered mixing with pro features... The new Kam KMD10 is a powered mixing console with class. Cast an experienced eye over the specifications for this unit and it becomes apparent that there are a heap of little extras and professional features here that are normally restricted to far more expensive products. You could start with the excellent mic pre amps & low noise high gain circuitry... or the Mute system that routes to a set of Alt3&4 outputs instead of just cutting the channel so you can set up a sub mix... or the 32 different 20BIT Effects... or the insert connections on the Channel Inputs, Aux, Alt and Master outputs... or the comprehensive Control Room monitoring system. You could start anywhere and there would still be a very long list of things like four band ‘line channel’ EQ and swept mid 3 band ‘mic channel’ EQ... and we wouldn’t even have started on the build quality, the protective control cover, the independant power supllies for the amplifier & mixer and external amplifier input.
|
|
Channel section 6 mono input channels with; Gold plate XLR mic inputs 48V phantom power Balanced jack line inputs TRS inserts Gain controls 75Hz cut switch Swept mid 3 band EQ 4 stereo line input channels with; Balanced jack inputs Channel Strips Four band EQ All input channels feature; Aux 1 send (pre or post switch) Internal FX/Aux 2 send Balance control PFL/Solo button (dual action) Mute/Alt 3&4 (mutes & routes) 60mm faders Master section 7 band graphic EQ (+/-10dB) Graphic EQ on/off Rotary aux 1 & 2 send controls Aux 1&2 PFL buttons 60mm fader aux 1 & 2 returns Alt 3&4 1/4" jack outputs Alt 3&4 TRS inserts Dedicated Alt 3&4 level fader Alt 3&4 PFL RCA phono 2 track in & out Balanced XLR out (+4dBu/-10dBV switch) Unbalanced 1/4" jack master out Master TRS inserts 1/4" jack Control Room (CR) out Comprehensive CR out routing CR out rotary level control PFL or solo in place selector Headphone out 12 point LED level meter DSP digital effects system 24Bit stereo processing 32 effect types 46kHz 20BIT A/D D/A DSP FX direct In Amplifier Section Separate amplifier level controls 1/4" jack amplifier direct inputs.S 2 x 375W RMS into 4 Ohm Speakon out Binding post out Separate power on/off amp & mixer Channel EQ +/-15dB Low noise circuitry Low noise gain structure Carrying handle Protective rigid control cover 19" rack ears included Frequency Range 10Hz~60KHz THD 0.01% @ +4dbU/1KHz S/N Ratio 77dB Dimensions 535W x 410D x 185H (mm) Weight 18.5kg
|
THE KAM EXTREME 115 MARINE BIRCH PLY CONSTRUCTION FULL SPEC
Passive 15” full range
loudspeaker suitable for all use as a full range speaker or complete system
combination with Extreme Sub 18.
|
10